|
Home
Darter
hedgehog
Jackal
Jims
Hogs
surface Lures
Colour chart
Articles / Information
Links
Gallery
About us
Contact me
| |
Maintaining
your lures.
You just had your first outing with the shiny new lures, and if
you have been skilful or lucky to have managed a few fish on them. Depending on
the size and the way the fish were hooked your shiny lure will probably be a
little battle worn. Its not the end of the world though Predator Lures are built
to stand the onslaught, if the lacquer and paint have been cut down to the
timber don’t worry the rest of the finish will stay put. It won’t all fall
off the next time you go out but you do need to take a little care of them.
Naturally all my Lures are built from wood and eventually the finish will
deterorate, however one of my best Lures is a Darter in Perch pattern. The lure
has now more wood than paint showing due to the swinging of the hooks and the
teeth of fish. It is almost a sure thing that it will still catch if the fish
are taking. So don't get too hung up on lures looking in as new condition.
After a session in the water
the lures need to dry slowly, putting them in or on heat does more harm! This
will cause stresses within the timber and shorten the life of the lure. The best
thing to do is to hang them to dry in the garage or shed, remove the hook
bonnets as hooks can rust inside. If you want to seal the cuts, holes and
scratches wait until the next day when the lures will be dry. You can touch up
lures with just about anything, as the existing lacquer will not react. Nail
varnish, araldite, and superglue are the commonest things used to repair damage.
Periodically check the hook hangers to make sure they have not been unscrewed a
little by thrashing pike, or that they have not been damaged by casting into
hard structures, or impact with them Finally sharpen the hooks ready for
next time.
Good fishing.
|